Komatsu D475A-5 (SN from 20001) Crawler Dozers (Japan) Field Assembly Manual (GEN00012-00)

Illustrated factory Field Assembly Manual for Komatsu Crawler Dozers Models D475A-5.

This manual will assist you in for your crawler dozer.
You can use a Windows, Mac, or Android device to view this manual. You only need to have a PDF reader installed.

Covered Models (Japan):
   D475A-5 (SN: 20001-)

Format: PDF, 179 pages
Language: English
Table of Contents:
   SPECIFICATIONS
   PRECAUTIONS FOR FIELD ASSEMBLY
   ASSEMBLY PROCEDURE, NECESSARY EQUIPMENT, AND SCHEDULE
   LAYOUT OF KIT
   STYLE FOR TRANSPORTATION
   TOOLS LIST FOR FIELD ASSEMBLY
   TIGHTENING TORQUE
   COATING MATERIALS
   A. ASSEMBLY PROCEDURE
      A-1 INSTALLATION OF UNDERCARRIAGE
      A-2 INSTALLATION OF RIPPER
      A-3 INSTALLATION OF TRACKS
      A-4 ADDING OIL TO PIVOT CHAMBER
      A-5 INSTALLATION OF RIPPER SHANK
      A-6 INSTALLATION OF BLAD LIFT CYLINDER
      A-7 INSTALLATION OF TRUNNION
      A-8 ASSEMBLY OF BLADE
      A-9 ADJUSTMENT OF ARM JOINT (U-BLADE)
      A-10 INSTALLATION OF BLADE
      A-11 INSTALLATION OF COUNTERWEIGHT
      A-12 INSTALLATION OF OPERATOR'S CAB
      A-13 INSTALLATION OF ROPS
      A-14 ADJUSTMENT OF POTENTIOMETER ROD
      A-15 PROCEDURE FOR ADJUSTING BLADE TILT ANGLE LIMIT
      A-16 METHOD OF CHECKING AUTOR-RESET SYSTEM (SUPERDOZER
      A-17 CHECK TRACK TENSION
      A-18 CHECKING FUEL, COOLANT AND LUBRICANTS
      A-19 GREASING OF GREASING POINT
      A-20 INSTALLATION OF ORTBOCMM ANTENNA AND WIRING HARNESS
      A-21 REPLACEMENT OF RETURN FILTER (REPLACEMENT OF STANDARD FILTER WITH FLUSHING FILTER)
      A-22 INSTALLING DIRECTION OF EXHAUST PIPE
      A-23 BLEEDING AIR FROM HYDRAULIC CYLINDERS
      A-24 INSTALLING LUNCHBOX BAND (IF EQUIPPED)
   M. CHECK AND MAINTENANCE PROCEDURES AFTER COMPLETION OF ASSEMBLY
      M-1 CHECK AND ADJUSTMENT OF OPERATOR'S CAB
      M-2 ERROR CODE
      M-3 FLUSHING OF HYDRAULIC CIRCUIT
   APPENDIX 1
      INSTALLATION OF SPILL GUARDS
   APPENDIX 2
      PRECAUTIONS FOR INITIALIZATION PROCEDURES FOR VHMS CONTROLLER
   FIELD ASSEMBLY INSPECTION REPORT (U-DOZER SPECIFICATION)
   FIELD ASSEMBLY INSPECTION REPORT (SUPERDOZER SPECIFICATION)