Komatsu PC490LC-10 (SN from 80001) Crawler Excavators (Japan) Field Assembly Manual (GEN00109-02)

Illustrated factory Field Assembly Manual for Komatsu Crawler Excavators Models PC490LC-10.

This manual will assist you in for your crawler excavator.
You can use a Windows, Mac, or Android device to view this manual. You only need to have a PDF reader installed.

Covered Models (Japan):
   PC490LC-10 (SN: 80001-)

Format: PDF, 129 pages
Language: English
Table of Contents:
   FOREWORD
   Specifications
   Precautions for field assembly
   Disposal of removed parts
   Assembling procedures, applicable equipment and schedule
   Flow of field assembly
   Kit layout diagram
   Transportation
   Tool list for field assembly
   Tightening torque
   Coating materials
   Selection of wire ropes used for assembly
   Selection of nylon slings used for assembly
   A. ASSEMBLY OF CHASSIS
      A-1 Installation of climbing step
      A-2 Installation of handrail
      A-3 Installation of mirror
   B. ASSEMBLING OF WORK EQUIPMENT
      B-1 Installation of boom cylinder
      B-2 Releasing remaining pressure in hydraulic circuit
      B-3 Installation of boom cylinder hoses
      B-4 Installation of boom cylinder top pin
      B-5 Installation of boom assembly
      B-6 Installation of hoses from chassis along top of boom
      B-7 Connection of boom cylinder head
      B-8 Installation of arm assembly
      B-9 Installation of bucket cylinder hoses between boom and bucket cylinder
      B-10 Installation of bucket
      B-11 Connection of work equipment grease piping
      B-12 Connection of work equipment wiring
      B-13 Greasing after completion of work equipment
      B-14 Bleeding air from work equipment circuit
   C. INCREASING AND DECREASING OF TRACK FRAME GAUGE, ASSEMBLING OF COUNTERWEIGHT
      C-1 Increasing and decreasing of track frame gauge
      C-2 Installation of steps
      C-3 Installation of travel piping covers
      C-4 Adjustment of track tension
      C-5 Sticking sheet to counterweight
      C-6 Installation of camera
      C-7 Installation of counterweight
   M. PROCEDURE FOR INSPECTION AND MAINTENANCE AFTER COMPLETION OF ASSEMBLY
      M-1 Replacement of return filter (Standard filter to flushing filter)
      M-2 Flushing of hydraulic circuit
      M-3 Replacement of return filter (Standard filter to flushing filt
      M-4 Check of oil/coolant level at each part
      M-5 Inspection of oil level in hydraulic tank and refill
      M-6 Parts to be touched up after field assembly
      M-7 Error code
   Mounting bolt torque check sheet
   Field assembly inspection report (Backhoe)