Komatsu WB93R-5 (SN from F50003) Backhoe Loaders Operators Manual (WEAM006000)

Illustrated factory Operators Manual for Komatsu Backhoe Loaders Models WB93R-5.

This manual will assist you in operating for your backhoe loader.
You can use a Windows, Mac, or Android device to view this manual. You only need to have a PDF reader installed.

Covered Models:
   WB93R-5 (SN: F50003-)

Format: PDF, 284 pages
Language: English
Table of Contents:
   FOREWORD
   INFORMATION ON SAFETY
   INTRODUCTION
      INTENDED USES
      IMPROPER OR UNAUTHORIZED USE
      MAIN CHARACTERISTICS
      RUNNING-IN
   PRODUCT IDENTIFICATION
      MACHINE IDENTIFICATION NUMBER (PIN)
      MACHINE IDENTIFICATION PLATE AND PRODUCT IDENTIFICATION NUMBER (PIN) (alternatively for some markets)
      MACHINE IDENTIFICATION PLATE AND PRODUCT IDENTIFICATION NUMBER (PIN)
      ENGINE SERIAL NUMBER AND EXHAUST GAS EMISSION PLATE
      FRONT AXLE SERIAL NUMBER
      REAR AXLE SERIAL NUMBER
      TRANSMISSION SERIAL NUMBER
      CAB SERIAL NUMBER
      SERIAL NUMBERS AND DEALER’S ADDRESS
   TABLE OF CONTENTS
   SAFETY, NOISE AND VIBRATION PLATES
      POSITION OF THE SAFETY PLATES
      PICTOGRAMS AND RELEVANT MEANINGS
      POSITION OF THE NOISE PLATES ON MACHINES WITH CAB
      VIBRATIONS TO WHICH THE OPERATOR IS SUBJECTED
   GENERAL PRECAUTIONS
      GENERAL SAFETY RULES
      SAFETY DEVICES AND GUARDS
      CLOTHING AND PERSONAL PROTECTION ITEMS
      UNAUTHORIZED MODIFICATIONS
      LEAVING THE OPERATOR’S SEAT
      GETTING ON AND OFF THE MACHINE
      CHECKING THE REAR-VIEW MIRRORS
      PREVENTING FIRES DUE TO FUEL AND OIL
      PREVENTING BURNS
      PREVENTING DAMAGE DUE TO ASBESTOS POWDER
      PREVENTING DAMAGE CAUSED BY THE WORK EQUIPMENT
      FIRE EXTINGUISHERS AND FIRST AID KIT
      PRECAUTIONS CONCERNING THE CAB STRUCTURE
      PRECAUTIONS CONCERNING THE EQUIPMENT
   PRECAUTIONS TO BE TAKEN BEFORE STARTING THE ENGINE
      SAFETY ON THE WORK SITE
      FIRE PREVENTION
      PRECAUTIONS TO BE TAKEN FOR THE OPERATOR'S CAB
      ROOM VENTILATION
      CLEANING WINDOWS, MIRRORS AND LIGHTS - CHECKING THE WINDSHIELD WIPER BLADES AND THE BULBS
   PRECAUTIONS TO BE TAKEN DURING WORK
      WHEN STARTING THE ENGINE
      RULES FOR TRAVELLING ON ROADS
      HAND SIGNALS
      CHECKS FOR TRAVELLING IN REVERSE
      MOVING THE MACHINE
      WORKING ON SLOPES
      PREVENTING ELECTROCUTION
      VISIBILITY
      WORKING ON ICY OR SNOW-COVERED SURFACES
      PREVENTING DAMAGE CAUSED BY THE WORK EQUIPMENT
      WORKING ON LOOSE GROUND
      PARKING THE MACHINE
   TRANSPORTING THE MACHINE ON OTHER VEHICLES
      LOADING AND UNLOADING THE MACHINE
      TRANSPORT
   BATTERY
      PREVENTING RISKS THAT MAY BE DUE TO THE BATTERY
      STARTING WITH BOOSTER CABLES
   PRECAUTIONS FOR EMERGENCY RECOVERY
   PRECAUTIONS TO BE TAKEN DURING MAINTENANCE
      WARNING PLATES
      TOOLS
      PERSONNEL
      EQUIPMENT
      WORKING UNDER THE MACHINE
      KEEPING THE MACHINE CLEAN
      USE OF THE ENGINE DURING MAINTENANCE
      PERIODICAL CHANGE OF THE SAFETY RELATED PARTS
      STOP THE ENGINE BEFORE CARRYING OUT ANY MAINTENANCE OPERATION OR INSPECTION
      RULES TO BE FOLLOWED DURING FUEL OR OIL TOPPING UP
      CHECKING THE COOLANT LEVEL IN THE RADIATOR
      USING LAMPS
      PRECAUTIONS CONCERNING THE BATTERY AND THE ALTERNATOR
      PRECAUTIONS CONCERNING THE STARTER
      HANDLING HIGH-PRESSURE PIPES
      PRECAUTIONS TO BE TAKEN WHEN WORKING ON HIGH- PRESSURE SYSTEMS
      PRECAUTIONS FOR MAINTENANCE WORK INVOLVING HIGH TEMPERATURES AND PRESSURES
      HYDRAULIC ACCUMULATOR
      COOLING FAN AND FAN BELT
      WASTE MATERIALS
      PRECAUTIONS CONCERNING TECHNOPOLYMERS AND ELASTOMERS
      PRECAUTIONS TO BE TAKEN WHEN INFLATING THE TYRES
      PRECAUTIONS FOR THE INSTALLATION OF THE EXHAUST SYSTEM TAILPIPE
      PRECAUTIONS TO BE TAKEN WHEN USING SYNTHETIC BIODEGRADABLE OIL TYPE «HEES»
   SAFETY LOCKS
      FRONT LOADER LOCKS
      BACKHOE LOCKS
   GENERAL VIEWS
      FRONT GENERAL VIEW
      BACKHOE GENERAL VIEW
      CAB INSIDE GENERAL VIEW
   INSTRUMENTS AND CONTROLS
      FRONT INSTRUMENTS
      SIDE INSTRUMENTS
      PUSH BUTTONS ON THE FRONT LOADER CONTROL LEVER
      PUSH BUTTON ON THE GEARSHIFT LEVER
      CAB SWITCHES AND ELECTRIC ACCESSORIES
      MACHINE CONTROLS
   FUSES AND RELAYS
      CENTRAL UNIT FUSES - RELAYS AND ENGINE LINE
      VENTILATION, HEATING AND AIR CONDITIONING FUSES AND RELAYS
   GUARDS, CAB AND DRIVER’S SEAT
      ENGINE HOOD
      CAB
      VENTILATION AND HEATING
      AIR CONDITIONER (if installed)
      SEAT
      SAFETY BELT
      FIRE EXTINGUISHER
      FIRST AID KIT
      TECHNICAL DOCUMENTATION
      STORAGE COMPARTMENT
   USE OF THE MACHINE
      CHECKS TO BE CARRIED OUT BEFORE STARTING THE ENGINE
      STARTING THE ENGINE
      WARMING THE ENGINE
      HEATING THE HYDRAULIC OIL
      HOW TO MOVE THE MACHINE
   PARKING THE MACHINE
      PARKING ON LEVEL GROUND
      PARKING ON SLOPES
   STOPPING THE ENGINE
   TRANSPORTING THE MACHINE ON OTHER VEHICLES
      LOADING AND UNLOADING THE MACHINE
      TRANSPORT
   PRECAUTIONS TO BE TAKEN IN THE COLD SEASON
      FUEL AND LUBRICANTS
      COOLANT
      BATTERY
      OTHER PRECAUTIONS
      PRECAUTIONS TO BE TAKEN AT THE END OF WORK
   PRECAUTIONS TO BE TAKEN AT THE END OF THE WINTER
   USING THE MACHINE AS A LOADER
      BUCKET POSITION INDICATOR
      ORGANIZING THE WORK AREA
      CHANGING THE STANDARD FRONT BUCKET
   USING THE MACHINE AS AN EXCAVATOR
      POSITIONING THE BUCKET ACCORDING TO THE WORK THAT MUST BE CARRIED OUT
      POSITIONING THE MACHINE FOR DIGGING OPERATIONS
      SLIDING THE BACKHOE UNIT SIDEWARDS
      DIGGING METHOD
   LONG PERIODS OF INACTIVITY
      PREPARING THE MACHINE FOR A LONG PERIOD OF INACTIVITY
      PREPARING THE ENGINE FOR A LONG PERIOD OF INACTIVITY
      MAINTENANCE DURING A PERIOD OF INACTIVITY
      RESTARTING THE ENGINE
      AFTER THE PERIOD OF INACTIVITY
   TROUBLESHOOTING
      HOW TO REMOVE THE MACHINE
      AFTER THE FUEL HAS RUN OUT
      IF THE BATTERY HAS RUN DOWN
      OTHER TROUBLES
   GUIDE TO MAINTENANCE
   MAINTENANCE NOTES
      NOTES REGARDING THE ENGINE
      NOTES REGARDING THE HYDRAULIC SYSTEM
      NOTES REGARDING THE ELECTRIC SYSTEM
      NOTES REGARDING LUBRICATION
      PARTS SUBJECT TO WEAR THAT PERIODICALLY NEED CHANGING
   FUEL, COOLANT AND LUBRICANTS
      LUBRICATION WITH GREASE
      HOMOLOGATED SYNTHETIC BIODEGRADABLE LUBRICANTS “HEES”
   DRIVING TORQUES
      STANDARD DRIVING TORQUES FOR SCREWS AND NUTS
      SPECIFIC DRIVING TORQUES FOR SCREWS AND NUTS
      STANDARD DRIVING TORQUES FOR HOSES WITH ORFS
   LUBRICATION
      LUBRICATION DIAGRAM
      LUBRICATION DIAGRAM (4in1 bucket and pallet forks)
      LUBRICATION DIAGRAM (front bucket quick couplings)
      LUBRICATION DIAGRAM (offset device)
   PERIODICAL CHANGE OF THE SAFETY RELATED COMPONENTS
      SAFETY RELATED PARTS
   MAINTENANCE PLAN
   MAINTENANCE PROCEDURES
      WHEN REQUIRED
      MAINTENANCE INTERVALS IN CASE OF USE OF THE DEMOLITION HAMMER
      CHECKS TO BE CARRIED OUT BEFORE STARTING THE ENGINE
      MAINTENANCE EVERY 10 HOURS OF OPERATION
      MAINTENANCE AFTER THE FIRST 50 HOURS OF OPERATION (Only for machines in which synthetic biodegradable oil type HEES is used)
      MAINTENANCE EVERY 50 HOURS OF OPERATION
      MAINTENANCE AFTER THE FIRST 250 HOURS OF OPERATION
      MAINTENANCE EVERY 250 HOURS OF OPERATION
      MAINTENANCE AFTER THE FIRST 500 HOURS OF OPERATION (Only for machines in which synthetic biodegradable oil type HEES is used)
      MAINTENANCE EVERY 500 HOURS OF OPERATION
      MAINTENANCE EVERY 1000 HOURS OF OPERATION
      MAINTENANCE EVERY 2000 HOURS OF OPERATION
      MAINTENANCE EVERY 3000 HOURS OF OPERATION
      MAINTENANCE EVERY 4000 HOURS OF OPERATION
   TECHNICAL DATA
      STANDARD OVERALL DIMENSIONS
      TECHNICAL CHARACTERISTICS
      LIFTING CAPACITIES
   AUTHORIZED OPTIONAL EQUIPMENT
      PRECAUTIONS REGARDING SAFETY
      PRECAUTIONS REGARDING THE INSTALLATION OF EQUIPMENT
      CHARACTERISTICS OF THE OPTIONAL EQUIPMENT
   FRONT EQUIPMENT QUICK COUPLING DEVICES
      MANUAL QUICK COUPLING
      HYDRAULIC QUICK COUPLING FOR STANDARD BUCKET
      HYDRAULIC QUICK COUPLING FOR 4in1 BUCKET AND OPTIONAL EQUIPMENT WITH UNIDIRECTIONAL OIL FLOW
   in1 BUCKET
      DESCRIPTION AND CONTROLS
      SAFETY DEVICES
      INSTALLING THE 4in1 BUCKET
      USING THE 4in1 BUCKET
      MAINTENANCE
   PALLET FORKS
      DESCRIPTION
      SAFETY DEVICES
      USING THE FORKS
      REMOVING THE FORKS
      INSTALLING THE FORKS
      MAINTENANCE
   BACKHOE TELESCOPIC ARM
      DESCRIPTION AND CONTROL
      SAFETY DEVICES
      USING THE TELESCOPIC ARM
      MAINTENANCE
   CONFIGURATION FOR THE INSTALLATION OF THE DEMOLITION HAMMER
      DESCRIPTION AND CONTROL
      USE OF THE DEMOLITION HAMMER AND RULES TO BE OBSERVED
      INSTALLING AND REMOVING THE DEMOLITION HAMMER
      USING THE HAMMER
      MAINTENANCE
   APPLICATION OF THE OFFSET DEVICE
      DESCRIPTION AND CONTROL
      MAINTENANCE
   CONFIGURATION FOR THE USE OF OPTIONAL EQUIPMENT WITH UNIDIRECTIONAL OIL FLOW
      DESCRIPTION AND CONTROL
      INSTALLING AND CONNECTING THE EQUIPMENT
      MAINTENANCE
   CONFIGURATION FOR THE USE OF THE CLAMSHELL BUCKET
      DESCRIPTION AND CONTROL
      INSTALLING THE CLAMSHELL BUCKET
      USING THE CLAMSHELL BUCKET
      MAINTENANCE
   CONFIGURATION FOR THE USE OF THE HAND HYDRAULIC HAMMER
      DESCRIPTION AND CONTROL
      INSTALLING AND REMOVING THE HAND HAMMER
      USING THE HAMMER
      MAINTENANCE
   LOAD STABILIZER SYSTEM (LSS) (Optional)
      LOAD STABILIZER SYSTEM (LSS) ACCUMULATOR
   REAR EQUIPMENT MECHANICAL QUICK COUPLING DEVICE
      EQUIPMENT COUPLING AND RELEASE PROCEDURE
      MAINTENANCE